stainless steel
welded pipe & tube
TeCarve is a manufacturer-backed welded stainless steel pipe supplier serving industrial, structural and decorative fabrication requirements. The range covers TIG, plasma, laser and ERW welded pipe and tube in grades 201, 202, 304, 304L, 316, 316L, 409, 410, 430 and Duplex. Outer diameters from 6 mm to 4200 mm, wall thicknesses from 0.5 mm to 120 mm, lengths up to 12 meters and customized finishes are available.
For custom welded tube dimensions, finishes, and production coordination, see our custom stainless steel tube fabrication service.
High-Strength Welded Stainless Steel Tubing: Precision Weld Seams & Bright Annealing
Controlled weld seam options, protective bright annealing, and flexible FOB or DDP door delivery from our Foshan partner factory.
Specifications
Available Sizes by Standard
Markets: N. America, S. America, Middle East EPC, oil & gas (welded pipe · NPS/Sch)
| NPS | Sch | OD (mm) | WT (mm) | OD Tol. | WT Tol. |
|---|---|---|---|---|---|
| 1/8" | 10S | 10.3 | 1.24 | +0.4mm / −0.8mm | +20.0% / −12.5% |
| 1/2" | 10S | 21.3 | 2.11 | +0.4mm / −0.8mm | +20.0% / −12.5% |
| 3/4" | 10S | 26.7 | 2.11 | +0.4mm / −0.8mm | +20.0% / −12.5% |
| 1" | 10S | 33.4 | 2.77 | +0.4mm / −0.8mm | +20.0% / −12.5% |
| 1" | 40S | 33.4 | 3.38 | +0.4mm / −0.8mm | +20.0% / −12.5% |
| 2" | 10S | 60.3 | 2.77 | +0.8mm / −0.8mm | +20.0% / −12.5% |
| 2" | 40S | 60.3 | 3.91 | +0.8mm / −0.8mm | +20.0% / −12.5% |
| 4" | 10S | 114.3 | 3.05 | +1.6mm / −0.8mm | +22.5% / −12.5% |
| 4" | 40S | 114.3 | 6.02 | +1.6mm / −0.8mm | +15.0% / −12.5% |
| 8" | 10S | 219.1 | 3.76 | +2.4mm / −0.8mm | +22.5% / −12.5% |
| 12" | 10S | 323.9 | 4.57 | +2.4mm / −0.8mm | +22.5% / −12.5% |
| 24" | 10S | 610.0 | 6.35 | +3.2mm / −0.8mm | +17.5% / −12.5% |
OD tolerance per ASTM A999/A999M-23 Table 3; wall thickness tolerance per ASTM A312/A312M-24 Table 3. For welded pipe, the weld area is not limited by the Table 3 positive wall allowance.
- Supply Length / Form: Fixed lengths 1–12m; custom lengths and cut-to-length available
- Available Grades: 304, 304L, 316, 316L, 321, 409, 410, 430, etc.
- Surface Finish: Annealed & pickled, polished, bright annealed, or as requested
- Tolerance Compliance: Per ASTM A999 (pipe) / A554 (tube), EN ISO 1127, JIS G3448, or GB/T general tolerance tables
ASTM A249/A249M — Welded Heat-Exchanger Tube Reference
| OD band | Representative OD | A1016/A1016M OD tolerance | A249 wall tolerance |
|---|---|---|---|
| Under 1in | 19.05mm (3/4in) | ±0.004in [±0.10mm] | ±10% nominal wall |
| 1–1 1/2in, incl. | 25.40–38.10mm | ±0.006in [±0.15mm] | ±10% nominal wall |
| Over 1 1/2–2in | 44.45mm (1 3/4in) | ±0.008in [±0.20mm] | ±10% nominal wall |
| 2–2 1/2in | 60.33mm (2 3/8in) | ±0.010in [±0.25mm] | ±10% nominal wall |
| 3–4in, incl. | 76.20–101.60mm | ±0.015in [±0.38mm] | ±10% nominal wall |
S2 option: when the purchaser specifies S2, minimum-wall requirements of ASTM A1016/A1016M apply instead of the nominal-wall requirement; tubes must be marked S2.
Section 14.2 weld-wall limit: wall at the weld must not exceed the wall measured 90° from the weld by more than 6% of that measured wall or 0.004in [0.1mm], whichever is greater. This limit does not apply when wall is over 12% of OD, wall is over 0.165in [4.2mm], OD is over 3in [76.2mm], or Table 4 minimum yield strength is at least 35ksi [240MPa].
Verified against ASTM A249/A249M-04a §14.1/§14.2; confirm the edition incorporated by the purchase order.
Markets: N. America — ornamental, structural & mechanical welded tube (round tube · OD-based)
| OD range (in) | WT range (in) | OD Tol. ± |
|---|---|---|
| Under 1/2 | 0.020–0.049 | 0.004in [0.10mm] |
| 1/2–1 | 0.020–0.065 | 0.005in [0.13mm] |
| 1/2–1 | over 0.065–0.134 | 0.010in [0.25mm] |
| Over 1–1 1/2 | 0.025–0.065 | 0.008in [0.20mm] |
| Over 1–1 1/2 | over 0.065–0.134 | 0.010in [0.25mm] |
| Over 1 1/2–2 | 0.025–0.049 | 0.010in [0.25mm] |
| Over 1 1/2–2 | over 0.049–0.083 | 0.011in [0.28mm] |
| Over 1 1/2–2 | over 0.083–0.149 | 0.012in [0.30mm] |
| Over 2–2 1/2 | 0.032–0.065 | 0.012in [0.30mm] |
| Over 2–2 1/2 | over 0.065–0.109 | 0.013in [0.33mm] |
| Over 2–2 1/2 | over 0.109–0.165 | 0.014in [0.36mm] |
| Over 2 1/2–3 1/2 | 0.032–0.165 | 0.014in [0.36mm] |
| Over 2 1/2–3 1/2 | over 0.165 | 0.020in [0.51mm] |
| Over 3 1/2–5 | 0.035–0.165 | 0.020in [0.51mm] |
| Over 3 1/2–5 | over 0.165 | 0.025in [0.64mm] |
| Over 5–7 1/2 | 0.049–0.250 | 0.025in [0.64mm] |
| Over 5–7 1/2 | over 0.250 | 0.030in [0.76mm] |
ASTM A554-21 Table 2, round tube. Scope: OD up to 16in [406.4mm], wall from 0.020in [0.51mm]. Wall thickness tolerance is ±10% of specified wall (Table 2 footnote A).
- Supply Length / Form: Fixed lengths 1–12m; custom lengths and cut-to-length available
- Available Grades: 304, 304L, 316, 316L, 321, 409, 410, 430, etc.
- Surface Finish: Annealed & pickled, polished, bright annealed, or as requested
- Tolerance Compliance: Per ASTM A999 (pipe) / A554 (tube), EN ISO 1127, JIS G3448, or GB/T general tolerance tables
Markets: Europe, Middle East — welded stainless-steel tubes for pressure purposes
| OD (mm) | WT (mm) | OD Tol. | WT Tol. |
|---|---|---|---|
| 17.2 | 2.0 | ±0.30mm | ±0.20mm (±10.0%) |
| 21.3 | 2.3 | ±0.30mm | ±0.23mm (±10.0%) |
| 26.9 | 2.3 | ±0.30mm | ±0.23mm (±10.0%) |
| 33.7 | 2.6 | ±0.30mm | ±0.26mm (±10.0%) |
| 48.3 | 2.6 | ±0.36mm (±0.75%) | ±0.26mm (±10.0%) |
| 60.3 | 2.9 | ±0.45mm (±0.75%) | ±0.29mm (±10.0%) |
| 76.1 | 2.9 | ±0.57mm (±0.75%) | ±0.29mm (±10.0%) |
| 114.3 | 3.6 | ±0.86mm (±0.75%) | ±0.36mm (±10.0%) |
| 168.3 | 4.0 | ±1.26mm (±0.75%) | ±0.40mm (±10.0%) |
| 219.1 | 6.3 | ±2.19mm (±1.0%) | ±0.63mm (±10.0%) |
| 355.6 | 8.0 | ±3.56mm (±1.0%) | ±0.80mm (±10.0%) |
| 508.0 | 10.0 | ±5.08mm (±1.0%) | ±1.00mm (±10.0%) |
Conforms to BS EN 10217-7:2014 Table 10. Outside diameter tolerance: Class D3 (±0.75% or ±0.30mm, whichever is greater) for D ≤ 168.3mm; Class D2 (±1.0%) for D > 168.3mm. Wall thickness tolerance: Class T3 (±10.0% or ±0.20mm, whichever is greater).
- Supply Length / Form: Fixed lengths 1–12m; custom lengths and cut-to-length available
- Available Grades: 304, 304L, 316, 316L, 321, 409, 410, 430, etc.
- Surface Finish: Annealed & pickled, polished, bright annealed, or as requested
- Tolerance Compliance: Per ASTM A999 (pipe) / A554 (tube), EN ISO 1127, JIS G3448, or GB/T general tolerance tables
Markets: Japan, Southeast Asia — light-gauge welded pipe for ordinary piping
| Designation | OD (mm) | WT (mm) | OD Tol. (Any Pt. / Mean) | WT Tol. |
|---|---|---|---|---|
| 8Su | 9.52 | 0.7 | +0 / −0.37mm | ±0.12mm |
| 10Su | 12.70 | 0.8 | +0 / −0.37mm | ±0.12mm |
| 13Su | 15.88 | 0.8 | +0 / −0.37mm | ±0.12mm |
| 20Su | 22.22 | 1.0 | +0 / −0.37mm | ±0.12mm |
| 25Su | 28.58 | 1.0 | +0 / −0.37mm | ±0.12mm |
| 30Su | 34.0 | 1.2 | ±0.34mm (Mean ±0.20mm) | ±0.12mm |
| 40Su | 42.7 | 1.2 | ±0.43mm (Mean ±0.20mm) | ±0.12mm |
| 50Su | 48.6 | 1.2 | ±0.49mm (Mean ±0.25mm) | ±0.12mm |
| 60Su | 60.5 | 1.5 | ±0.60mm (Mean ±0.25mm) | ±0.15mm |
| 75Su | 76.3 | 1.5 | ±0.76mm (±1%) / Mean ±0.5% | ±0.15mm |
| 80Su | 89.1 | 2.0 | ±0.89mm (±1%) / Mean ±0.5% | ±0.30mm |
| 100Su | 114.3 | 2.0 | ±1.14mm (±1%) / Mean ±0.5% | ±0.30mm |
| 125Su | 139.8 | 2.0 | ±1.40mm (±1%) / Mean ±0.5% | ±0.30mm |
| 150Su | 165.2 | 3.0 | ±1.65mm (±1%) / Mean ±0.5% | ±0.40mm |
| 200Su | 216.3 | 3.0 | ±2.16mm (±1%) / Mean ±0.5% | ±0.40mm |
| 250Su | 267.4 | 3.0 | ±2.67mm (±1%) / Mean ±0.5% | ±0.40mm |
| 300Su | 318.5 | 3.0 | ±3.19mm (±1%) / Mean ±0.5% | ±0.40mm |
Conforms to JIS G3448:2022 Table 4 for light-gauge stainless steel pipes for ordinary piping. Wall thickness tolerances: 8–50Su ±0.12mm; 60–75Su ±0.15mm; 80–125Su ±0.30mm; 150–300Su ±0.40mm. OD tolerances include maximum/minimum diameter limits and mean outside diameter tolerances.
- Supply Length / Form: Fixed lengths 1–12m; custom lengths and cut-to-length available
- Available Grades: 304, 304L, 316, 316L, 321, 409, 410, 430, etc.
- Surface Finish: Annealed & pickled, polished, bright annealed, or as requested
- Tolerance Compliance: Per ASTM A999 (pipe) / A554 (tube), EN ISO 1127, JIS G3448, or GB/T general tolerance tables
Markets: China domestic & Belt-and-Road / Chinese-contracted EPC projects — welded fluid pipe
| OD (mm) | WT (mm) | OD Tol. | WT Tol. |
|---|---|---|---|
| 6 | 1.0 | ±0.30mm | ±0.10mm (±10%S) |
| 14 | 2.0 | ±0.30mm | ±0.20mm (±10%S) |
| 25 | 2.5 | ±0.30mm | ±0.25mm (±10%S) |
| 34 | 3.0 | ±0.30mm | ±0.30mm (±10%S) |
| 45 | 3.5 | ±0.40mm | ±0.35mm (±10%S) |
| 76 | 4.0 | ±0.50mm | ±0.40mm (±10%S) |
| 108 | 4.0 | ±1.00mm | ±0.40mm (±10%S) |
| 159 | 4.5 | ±1.00mm | ±0.45mm (±10%S) |
| 219 | 6.0 | ±2.19mm (±1.0%D) | ±0.60mm (±10%S) |
| 273 | 7.0 | ±2.73mm (±1.0%D) | ±0.70mm (±10%S) |
| 377 | 9.0 | ±3.77mm (±1.0%D) | ±0.90mm (±10%S) |
| 630 | 12.0 | ±4.41mm (±0.7%D) | ±1.20mm (±10%S) |
Conforms to GB/T 12771-2019 Table 1. Values shown reflect Ordinary Class (B) tolerances per Section 5.2.4; High-Precision Class (A) tolerances available upon request. Wall thickness tolerance is ±10%S across all sizes.
- Supply Length / Form: Fixed lengths 1–12m; custom lengths and cut-to-length available
- Available Grades: 304, 304L, 316, 316L, 321, 409, 410, 430, etc.
- Surface Finish: Annealed & pickled, polished, bright annealed, or as requested
- Tolerance Compliance: Per ASTM A999 (pipe) / A554 (tube), EN ISO 1127, JIS G3448, or GB/T general tolerance tables
Markets: Large-diameter welded pipe for low-/medium-temperature and corrosive service where heat treatment is not needed to obtain corrosion resistance
| OD range | Nominal WT range | OD tolerance | WT tolerance | Specified length | Straightness |
|---|---|---|---|---|---|
| 3–48in [75–1200mm] | 0.062–0.500in [1.57–12.70mm] | Applicable ASTM A999/A999M table | ±12.5% (§10.4) | Not under; max. +1/4in [6.35mm] (§10.1) | Max. 0.25in [6.35mm] gap on 10ft [3m] straightedge (§10.2) |
ASTM A778/A778M-15. §8.1 does not require heat treatment — the defining characteristic of this standard. §15.1 marking must include HT-O, indicating material not heat treated. Grades are limited to TP304L, TP316L, TP317L, TP321, and TP347. Projects requiring post-weld heat treatment or radiographic examination should use A312/A358/A409 (§1.1). Confirm the edition incorporated by the purchase order.
- Supply Length / Form: Fixed lengths 1–12m; custom lengths and cut-to-length available
- Available Grades: 304, 304L, 316, 316L, 321, 409, 410, 430, etc.
- Surface Finish: Annealed & pickled, polished, bright annealed, or as requested
- Tolerance Compliance: Per ASTM A999 (pipe) / A554 (tube), EN ISO 1127, JIS G3448, or GB/T general tolerance tables
For high-pressure or critical-corrosion duties that require no weld seam, compare with our Stainless Steel Seamless Pipe & Tube.
Comparing longitudinal seam integrity against extrusion methods? Read our full Seamless vs Welded Pipe & Tube Guide.
Get Your Welded Pipe Quote
Sourcing welded stainless steel pipe or tubing for industrial piping, heat exchangers, structural framing, or sanitary lines? Contact our export sales desk for live factory pricing, wall thickness confirmation, and low-risk trial orders (100–300 kg MOQ supported).
Instant pricing, production scheduling, and inventory availability directly from our sales engineering desk within 2 hours.
Short tube sample pieces provided for physical dimension check, weld seam flattening test, and surface finish evaluation.
Test machinery tooling, bending parameters, or project prototypes with low-MOQ trial quantities before full container commitments.
Complete heat-number traceability, chemical analysis, mechanical tensile/yield reports, and eddy-current NDT documentation.
Standards
→ Scroll right for full chemistry & mechanical data
| Grade | US (UNS) | EN (W.Nr.) | Japan (JIS) | China (GB/T) | C % (Max) | Si % (Max) | Mn % (Max) | P % (Max) | S % (Max) | Cr % | Ni % | Mo % | Tensile σb (Min.) | Yield σ0.2 (Min.) | Elongation (Min.) | Hardness (Max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 304 | S30400 | 1.4301 | SUS304 | 06Cr19Ni10 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-11.0 | — | 515 MPa (75 ksi) | 205 MPa (30 ksi) | 35% | ≤92 HRB / ≤215 HV |
| 304L | S30403 | 1.4307 | SUS304L | 022Cr19Ni10 | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | — | 485 MPa (70 ksi) | 170 MPa (25 ksi) | 35% | ≤92 HRB / ≤215 HV |
| 316 | S31600 | 1.4401 | SUS316 | 06Cr17Ni12Mo2 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 515 MPa (75 ksi) | 205 MPa (30 ksi) | 35% | ≤95 HRB / ≤215 HV |
| 316L | S31603 | 1.4404 | SUS316L | 022Cr17Ni12Mo2 | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 485 MPa (70 ksi) | 170 MPa (25 ksi) | 35% | ≤95 HRB / ≤215 HV |
| 321 | S32100 | 1.4541 | SUS321 | 06Cr18Ni11Ti | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-12.0 | — | 515 MPa (75 ksi) | 205 MPa (30 ksi) | 35% | ≤95 HRB / ≤215 HV |
| 409 | S40900 | 1.4512 | SUS409 | 022Cr12Ti | 0.03 | 1.00 | 1.00 | 0.040 | 0.020 | 10.5-11.75 | — | — | 380 MPa (55 ksi) | 205 MPa (30 ksi) | 20% | ≤88 HRB / ≤190 HV |
| 410 | S41000 | 1.4006 | SUS410 | 12Cr13 | 0.15 | 1.00 | 1.00 | 0.040 | 0.030 | 11.5-13.5 | — | — | 450 MPa (65 ksi) | 205 MPa (30 ksi) | 20% | ≤96 HRB / ≤210 HV |
| 430 | S43000 | 1.4016 | SUS430 | 10Cr17 | 0.12 | 1.00 | 1.00 | 0.040 | 0.030 | 16.0-18.0 | — | — | 450 MPa (65 ksi) | 205 MPa (30 ksi) | 22% | ≤89 HRB / ≤200 HV |
- Standards Conformance: ASTM A249/A269/A270/A312/A554/A778 · EN 10217/10296/10312 · DIN 17455/11850 · JIS G3448/G3463 · GB/T 12771 / GB 19228
- Delivery Condition: Solution Annealed & Pickled (AP) / Bright Annealed (BA) / Polished, or as requested.
- Mill Test Certificate: 100% full material traceability with EN 10204 3.1 MTC provided with every shipment.
Features
• Superior corrosion resistance for harsh environments
• Available in decorative, sanitary, and structural grades
• High dimensional accuracy and smooth weld seams
• Cost-effective alternative to seamless pipes in low-pressure systems
• Custom finishes and cutting services available
Applications
For welded tube used in process, sanitary, or marine systems, see how to verify TeCarve's welding, inspection, and order-traceability process, including optional third-party witnessing.
Quality Control
Weld Seam Examination & Finish: How to Specify It
Weld-seam NDT must be named in the order with its coverage, acceptance criterion and inspection document. Eddy-current testing is an electromagnetic method commonly specified for surface/near-surface discontinuities; radiographic examination is specified when the project requires a volumetric image of the weld. EN 10217-7 explicitly makes the weld-seam NDT method an ordering choice (Table 16). ASTM A312 certification must state whether hydrostatic or nondestructive electric testing was performed, and, for NDT, the practice and reference discontinuities used.
For heat-exchanger tubing, ASTM A249 sets a weld reinforcement limit and requires finished tubes to be chemically descaled or pickled after final heat treatment; bright-annealed material does not require pickling. Where a smooth cosmetic or sanitary surface is required, specify weld-bead dressing/polishing, finish, roughness target and inspection method separately rather than assuming them from the base pipe standard.
Welded pipe is often an economical choice for larger diameters and general corrosive/process service when the specified weld examination and product standard are met. Seamless pipe remains appropriate where the design code, pressure, cyclic-duty assessment or customer specification calls for a weld-free product. TeCarve’s stated management-system certifications are ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.
• Raw material sourcing from certified stainless steel mills
• Weld-seam examination to the ordered standard and purchase order (eddy-current or radiographic examination where required)
• Hydrostatic or nondestructive electric testing when required by the ordered standard or project specification
• Surface finish inspection and dimensional verification
• Third-party inspection available for export standards
packaging
PVC Wrapping
& End Caps
Custom Barcoding
& Labeling
Anti-Corrosion
& Moisture Protection
Seaworthy Wooden Cases & Pallets
Welded Pipe Packaging & Inspection Photos
Real product, inspection, packaging and loading photos.
Tailored Solutions, Timely Fulfillment
CUSTOMIZATION
& DELIVERY
Flexible Custom Manufacturing
We customize stainless steel welded pipe and tube by diameter, wall thickness, length, surface finish, material grade, and the required TIG, plasma, laser, or ERW welding type.
Low MOQ & Rapid Prototyping
MOQ is as low as 100–300 kg for flexible trial orders, with small batch customization and sample production supported, helping you shorten your development cycle and market entry.
Optimized Lead Time
In-stock standard sizes ship within 7–10 days. Custom specifications typically ship within 10–25 days after deposit, depending on order volume, dimensions, and surface finish. The full cycle—from inquiry and drawing confirmation through sampling, production, inspection, and dispatch—typically takes 33–55 days for custom items.
Global Logistics & On-Time Delivery
For welded pipe shipments worldwide, PVC wrapping and end caps protect finished surfaces while seaworthy wooden cases and pallets support secure transport.
How your order is made, checked and shipped
Tube forming at the partner factory
Heat treatment (annealing)
Dimensional inspection
Alloy verification with a handheld analyzer
Export packing
Container loading
What Global Buyers Say About TeCarve Tubing
“I've received the goods and everything is fine.”
“The goods already send to customers. I am waiting for the next order from them.”
“…there is no need of inspection this time… I trust in your product.”
Frequently Asked Questions
How is stainless steel welded pipe manufactured?
Stainless steel welded pipe is formed by rolling flat strip into a tube and joining the seam by TIG (GTAW) or laser welding, followed by annealing and bright-annealing for a clean, uniform finish. TeCarve sources from partner factories using automated TIG welding for consistent seam integrity across all production runs.
What grades are available for welded stainless steel pipe?
We supply welded stainless steel pipe in grades 201, 202, 304, 304L, 316, 316L, 409, 410, 430, and duplex stainless steel, conforming to ASTM A249, ASTM A269, ASTM A270, ASTM A312, ASTM A554, ASTM A778, EN 10217, EN 10296, EN 10312, DIN 17455, and DIN 11850.
What surface finishes are available for welded stainless steel pipe?
Available finishes: 2B (mill), No. 4 (brushed/satin), No. 8 (mirror), BA (bright annealed), and Ra ≤ 0.8 µm polished for sanitary service. Internal polishing to Ra ≤ 0.4 µm is available for pharmaceutical-grade tube.
What are typical applications for welded stainless steel pipe?
Welded stainless steel pipe is ideal for food processing, dairy, pharmaceutical, water treatment, HVAC, decorative and architectural piping, and low-to-medium-pressure industrial systems where cost efficiency is important.
Can I order custom lengths and wall thicknesses for welded pipe?
Yes. Custom lengths up to 12 m, non-standard wall thicknesses, and end treatments (beveled, plain, threaded, flanged) are available. Flexible trial orders starting from 100–300 kg are supported for standard and custom specifications; contact TeCarve sales for a quote.
Can TeCarve supply both FOB and DDP prices for welded pipes?
Yes. We offer FOB, CIF, CFR, and DDP (Delivered Duty Paid) commercial terms. DDP quotes include ocean freight, customs clearance, and inland trucking, providing transparent landed cost.
Are welded tubes available with bright annealing and weld bead control?
Yes. We supply as-welded, welded and annealed (bright annealed in protective atmosphere), and cold-reduced conditions per customer ordering requirements and standard specifications.
What standards govern TeCarve's welded stainless steel pipes?
We supply welded stainless steel piping and tubing conforming to ASTM A312 (industrial fluid systems) and ASTM A554 (mechanical and structural applications). Every order includes an authentic EN 10204 3.1 Material Test Certificate.
Contact TeCarve