ksi to MPa Converter & Stainless Steel Strength Table

ksi to MPa converter: 1 ksi equals 6.894757 MPa

ksi to MPa Converter & Stainless Steel Strength Table

Will Lee - Account Manager, European Market at TeCarve
Will Lee
November 16, 2026
8 Min Read

Convert ksi to MPa: 1 ksi = 6.894757 MPa. Enter a stress value in ksi, MPa (N/mm²), psi or kgf/mm² and the other units update instantly. Conversion tables and the minimum tensile and yield strengths of common stainless steel pipe grades, as published in ASTM A312 and A790, follow the calculator.

ksi to MPa conversion table

ksiMPapsi
1 ksi6.9 MPa1,000 psi
5 ksi34.5 MPa5,000 psi
10 ksi68.9 MPa10,000 psi
15 ksi103.4 MPa15,000 psi
20 ksi137.9 MPa20,000 psi
25 ksi172.4 MPa25,000 psi
30 ksi206.8 MPa30,000 psi
35 ksi241.3 MPa35,000 psi
40 ksi275.8 MPa40,000 psi
45 ksi310.3 MPa45,000 psi
50 ksi344.7 MPa50,000 psi
55 ksi379.2 MPa55,000 psi
60 ksi413.7 MPa60,000 psi
65 ksi448.2 MPa65,000 psi
70 ksi482.6 MPa70,000 psi
75 ksi517.1 MPa75,000 psi
80 ksi551.6 MPa80,000 psi
85 ksi586.1 MPa85,000 psi
90 ksi620.5 MPa90,000 psi
95 ksi655.0 MPa95,000 psi
100 ksi689.5 MPa100,000 psi
110 ksi758.4 MPa110,000 psi
116 ksi799.8 MPa116,000 psi
120 ksi827.4 MPa120,000 psi
130 ksi896.3 MPa130,000 psi
140 ksi965.3 MPa140,000 psi
150 ksi1,034.2 MPa150,000 psi
175 ksi1,206.6 MPa175,000 psi
200 ksi1,379.0 MPa200,000 psi

MPa to ksi conversion table

MPa (N/mm²)ksi
100 MPa14.50 ksi
170 MPa24.66 ksi
205 MPa29.73 ksi
240 MPa34.81 ksi
275 MPa39.89 ksi
310 MPa44.96 ksi
345 MPa50.04 ksi
400 MPa58.02 ksi
450 MPa65.27 ksi
485 MPa70.34 ksi
515 MPa74.69 ksi
550 MPa79.77 ksi
600 MPa87.02 ksi
655 MPa95.00 ksi
690 MPa100.08 ksi
800 MPa116.03 ksi

Minimum tensile and yield strength of common stainless steel pipe grades

Values below are copied as published, in ksi with the standard’s own MPa value in brackets: ASTM A312/A312M-24b, Table 4 (austenitic pipe) and ASTM A790/A790M-24, Table 3 (duplex pipe). They are minimum specified values for pipe, not typical properties.

GradeUNSTensile, min ksi [MPa]Yield, min ksi [MPa]Source
TP304S3040075 [515]30 [205]A312 Table 4
TP304LS3040370 [485]25 [170]A312 Table 4
TP304HS3040975 [515]30 [205]A312 Table 4
TP309SS3090875 [515]30 [205]A312 Table 4
TP310SS3100875 [515]30 [205]A312 Table 4
TP316S3160075 [515]30 [205]A312 Table 4
TP316LS3160370 [485]25 [170]A312 Table 4
TP316HS3160975 [515]30 [205]A312 Table 4
TP317LS3170375 [515]30 [205]A312 Table 4
TP321 (welded; seamless t ≤ 0.375 in. [9.50 mm])S3210075 [515]30 [205]A312 Table 4
TP321 (seamless t > 0.375 in. [9.50 mm])S3210070 [485]25 [170]A312 Table 4
6Mo (t ≤ 0.187 in. [5.00 mm])S3125498 [675]45 [310]A312 Table 4
904L typeN0890471 [490]31 [215]A312 Table 4
DuplexS3180390 [620]65 [450]A790 Table 3
2205S3220595 [655]65 [450]A790 Table 3
2304S3230487 [600]58 [400]A790 Table 3
2507S32750116 [800]80 [550]A790 Table 3

Why the standard’s MPa value differs from the calculator

ASTM dual-unit specifications state that inch-pound and SI values are to be regarded separately as standard, and the SI value is a rounded figure in its own right. For example, 75 ksi converts to 517.1 MPa, but A312 lists the minimum tensile strength of TP304 as 75 ksi [515 MPa]; 30 ksi converts to 206.8 MPa, but the yield minimum is listed as [205 MPa]. When checking a mill test certificate, compare it with the unit system named on the purchase order rather than converting one limit into the other.

How to convert ksi to MPa

  • ksi to MPa: MPa = ksi × 6.894757
  • MPa to ksi: ksi = MPa ÷ 6.894757 (or MPa × 0.1450377)
  • ksi to psi: psi = ksi × 1,000
  • kgf/mm² to MPa: MPa = kgf/mm² × 9.80665

For pressure rather than stress, use the MPa to psi converter or the psi to MPa converter. For hardness scales, see the hardness conversion chart.


Written by Will Lee, Account Manager (Europe), TeCarve · Reviewed against ASTM / EN / ISO source documents · How we write and review our technical guides →
Will Lee - Account Manager, European Market at TeCarve

Author: Will Lee

Will Lee is TeCarve's Account Manager for Europe and the author of TeCarve's technical guides on stainless steel pipe and tube. His article on ASTM A312, A213 and A249 tubing was published in Stainless Steel World (October 2026). He reviews buyer specifications and drawings against ASTM, EN and DIN standards, advises on grade, tolerance and testing requirements, and checks the mill test certificates issued by the producing plants before European shipments.