409 stainless steel (UNS S40900, EN 1.4512) is a titanium-stabilized ferritic stainless steel with 10.5–11.7 % chromium and almost no nickel (0.50 % max). It is magnetic, and its chromium is about half that of 304 (18.0–20.0 %). In ASTM A554 welded tube, S40900 has been replaced by three variants, S40910, S40920 and S40930, any of which may be supplied against an order for Type 409.
409 stainless steel chemical composition
Limits from ASTM A268/A268M-24 Table 1 (TP409) and ASTM A554-26 Table 1 (S40910, S40920, S40930); 304 from A554 Table 1 for comparison.
| Element, % | TP409 (S40900), ASTM A268 | S40910 / S40920 / S40930, ASTM A554 | 304 (S30400) for comparison |
|---|---|---|---|
| Carbon, max | 0.08 | 0.030 | 0.08 |
| Manganese, max | 1.00 | 1.00 | 2.00 |
| Phosphorus, max | 0.045 | 0.040 | 0.045 |
| Sulfur, max | 0.030 | 0.020 | 0.030 |
| Silicon, max | 1.00 | 1.00 | 0.75 |
| Chromium | 10.5–11.7 | 10.5–11.7 | 18.0–20.0 |
| Nickel | 0.50 max | 0.50 max | 8.0–11.0 |
| Nitrogen, max | – | 0.030 | 0.10 |
| Stabilizing elements | Ti 6 × C min, 0.75 max | S40910: Ti 6 × (C+N) min, 0.50 max; Nb 0.17 max. S40920: Ti 8 × (C+N) min, Ti 0.15–0.50; Nb 0.10 max. S40930: (Ti+Nb) 0.08 + 8 × (C+N) min, 0.75 max; Ti 0.05 min | – |
S40900 vs S40910, S40920 and S40930
Footnote J to ASTM A554-26 Table 1 states that S40900 (Type 409) has been replaced by S40910, S40920 and S40930. Unless otherwise specified in the ordering information, an order for S40900 or Type 409 is satisfied by any one of the three at the option of the seller, and material meeting any of them may, at the manufacturer’s option, be certified as S40900. The three share the same base limits (0.030 % C max, 10.5–11.7 % Cr) and differ in how titanium and niobium are added to stabilize carbon and nitrogen. If a specific variant is required, name it on the order.
409 stainless steel mechanical properties (tube)
| Property (ASTM A268 Tables 3 and 5) | TP409 (S40900) |
|---|---|
| Tensile strength, min | 55 ksi (380 MPa) |
| Yield strength, min | 25 ksi (170 MPa) |
| Elongation in 2 in. (50 mm), min | 20 % |
| Hardness, max | 207 HB / 95 HRB |
409 vs 304 stainless steel
| 409 | 304 | |
|---|---|---|
| Family | Ferritic | Austenitic |
| Chromium, % | 10.5–11.7 | 18.0–20.0 |
| Nickel, % | 0.50 max | 8.0–11.0 |
| Magnetizable (EN 10088-1 Annex E) | Yes (1.4512) | No (1.4301) |
| Mean thermal expansion 20–100 °C | 10.5 × 10⁻⁶/K | 16.0 × 10⁻⁶/K |
| Thermal conductivity at 20 °C | 25 W/(m·K) | 15 W/(m·K) |
| Density | 7.7 kg/dm³ | 7.9 kg/dm³ |
| Welded tube specification | ASTM A554 (S40910, S40920, S40930), ASTM A268 (TP409) | ASTM A554, A249, A269 and others |
- Composition: 409 has about half the chromium of 304 and 0.50 % nickel max; 304 is austenitic, with 8.0–11.0 % nickel.
- Magnetism: 409 is ferritic and listed as magnetizable in EN 10088-1 Annex E; 304 (1.4301) is listed as not magnetizable. See is stainless steel magnetic.
- Thermal behaviour: 409 expands about a third less than 304 between 20 and 100 °C and conducts heat better; full data by temperature is in stainless steel thermal expansion and conductivity.
- For other ferritic grades, see 430 stainless steel; equivalents are in the stainless steel grades chart.
Physical properties of 409
EN 10088-1:2023 Annex E (1.4512, X2CrTi12; UNS S40900 per Table A.1): density 7.7 kg/dm³; modulus of elasticity 220 GPa at 20 °C; mean thermal expansion 10.5 (20–100 °C), 11.0 (20–200 °C), 11.5 (20–300 °C) and 12.0 × 10⁻⁶/K (20–400 °C and 20–500 °C); thermal conductivity 25 W/(m·K) and specific heat 460 J/(kg·K) at 20 °C; magnetizable.
Sources: ASTM A268/A268M-24, Tables 1, 3 and 5; ASTM A554-26, Table 1 and footnote J; EN 10088-1:2023, Annex E (Tables E.1 and E.3) and Table A.1.


