Stainless Steel Grades Chart: UNS, EN, JIS & GB Equivalents

Stainless steel grades chart with UNS, EN, JIS and GB equivalents

Stainless Steel Grades Chart: UNS, EN, JIS & GB Equivalents

Will Lee - Account Manager, European Market at TeCarve
Will Lee
November 16, 2026
7 Min Read

This stainless steel grades chart cross-references 24 common grades across the American (UNS), European (EN), ISO, Japanese (JIS) and Chinese (GB/T 20878) designation systems, grouped by family: austenitic, molybdenum-bearing austenitic, duplex, ferritic and martensitic. All designations come from EN 10088-1:2023, Annex A, Table A.1; densities come from Annex E of the same standard.

Read this first: EN 10088-1 marks each cross-reference as I (identical to the ISO grade), N (closer match of composition, but not identical) or W (wider match). Most of the pairs below are N or W, so a JIS or GB grade is a comparable grade, not an identical one. Order to the actual standard and grade the project specifies.

How to read a stainless steel grade name

  • UNS (e.g. S30400, S31603): the American number used in ASTM product standards; “L” grades such as 304L/316L carry a 3 in the last digits (S30403, S31603).
  • EN number (e.g. 1.4301) and EN / ISO name (e.g. X5CrNi18-10): in the name, X marks a high-alloy steel, the first number is carbon × 100 (5 = 0.05 %) and the following figures are the nominal percentages of the listed elements (Cr 18, Ni 10).
  • JIS (e.g. SUS304): Japanese grade; pipe and tube standards add a product suffix such as SUS304TP.
  • GB/T 20878 (e.g. S30408): the Chinese unified numbering system (ISC).

Austenitic stainless steels (Cr-Ni)

Common nameUNS (ASTM A959)EN numberEN / ISO nameJISGB/T 20878Density g/cm³
201S201001.4372X12CrMnNiN17-7-5SUS201S35350—
304S304001.4301X5CrNi18-10SUS304S304087.9
304LS304031.4307X2CrNi18-9SUS304LS304037.9
304HS304091.4948X7CrNi18-9SUS304HS304097.9
309SS309081.4950X6CrNi23-13SUS309SS30908—
310SS310081.4845X8CrNi25-21SUS310SS310087.9
321S321001.4541X6CrNiTi18-10SUS321S321687.9
321HS321091.4940X7CrNiTi18-10SUS321HS32169—
347S347001.4550X6CrNiNb18-10SUS347S347787.9
347HS347091.4912X7CrNiNb18-10SUS347HS34779—

Austenitic stainless steels with molybdenum

Common nameUNS (ASTM A959)EN numberEN / ISO nameJISGB/T 20878Density g/cm³
316S316001.4401X5CrNiMo17-12-2SUS316S316088.0
316LS316031.4404X2CrNiMo17-12-2SUS316LS316038.0
316TiS316351.4571X6CrNiMoTi17-12-2SUS316TiS316688.0
317LS317031.4438X2CrNiMo19-14-4SUS317LS317038.0
6Mo (254 type)S312541.4547X1CrNiMoCuN20-18-7SUS312LS312528.0
904LN089041.4539X1NiCrMoCu25-20-5SUS890LS390428.0

Duplex (austenitic-ferritic) stainless steels

Common nameUNS (ASTM A959)EN numberEN / ISO nameJISGB/T 20878Density g/cm³
2304S323041.4362X2CrNiN23-4—S230437.8
2205S322051.4462X2CrNiMoN22-5-3SUS329J3LS220537.8
2507S327501.4410X2CrNiMoN25-7-4—S250737.8

Ferritic stainless steels

Common nameUNS (ASTM A959)EN numberEN / ISO nameJISGB/T 20878Density g/cm³
409S409001.4512X2CrTi12SUH409LS111637.7
430S430001.4016X6Cr17SUS430S117107.7
439S439401.4509X2CrTiNb18SUS430LXS118737.7

Martensitic stainless steels

Common nameUNS (ASTM A959)EN numberEN / ISO nameJISGB/T 20878Density g/cm³
410S410001.4006X12Cr13SUS410S410107.7
420S420001.4021X20Cr13SUS420J1S420207.7

“—” means EN 10088-1 Table A.1 lists no comparable grade in that system, or Annex E gives no density for that steel number. Densities are guidance values; see stainless steel density and physical properties for the full Annex E data and stainless steel melting point for melting ranges with sources.

Which grade family to choose

  • 304 / 304L: the general-purpose austenitic grades; L grades have lower carbon for welded construction.
  • 316 / 316L: add molybdenum for better resistance to pitting in chloride-bearing media; compared in 304 vs 316 vs 316L.
  • 321 / 347: titanium- or niobium-stabilised for service in the sensitisation temperature range; H grades (304H, 321H, 347H) have controlled higher carbon for elevated-temperature strength.
  • Duplex 2205 / super duplex 2507: higher strength and chloride stress-corrosion resistance; see duplex 2205 and 2507.
  • Ferritic and martensitic grades (409, 430, 410, 420): magnetic, lower nickel; used where their specific properties fit, such as decorative or exhaust applications.

Grade data pages: 304 / 304L stainless steel pipe and tube and 316 vs 316L.

For grade data used in pipe and tube orders, see the guides for 316L stainless steel tube, 321 stainless steel tube and pipe, 310S stainless steel pipe and 904L stainless steel.

Written by Will Lee, Account Manager (Europe), TeCarve · Reviewed against ASTM / EN / ISO source documents · How we write and review our technical guides →
Will Lee - Account Manager, European Market at TeCarve

Author: Will Lee

Will Lee is TeCarve's Account Manager for Europe and the author of TeCarve's technical guides on stainless steel pipe and tube. His article on ASTM A312, A213 and A249 tubing was published in Stainless Steel World (October 2026). He reviews buyer specifications and drawings against ASTM, EN and DIN standards, advises on grade, tolerance and testing requirements, and checks the mill test certificates issued by the producing plants before European shipments.