Calculate the theoretical weight of stainless steel pipe, round tube, square tube and rectangular tube from outside dimensions, wall thickness and length. Choose a grade to apply its density from EN 10088-1:2023, or enter your own density. Results show kg/m, lb/ft and the total weight of an order.
Formulas used
- Round pipe or tube: cross-section area = π × t × (D − t), so kg/m = π × t × (D − t) × ρ ÷ 1000, with D and t in mm and ρ in g/cm³. For ρ = 7.9 this is kg/m ≈ 0.02482 × t × (D − t).
- Square or rectangular tube: area = 2t(A + B) − 4t², treating the corners as sharp. Real tube has corner radii, so its actual weight is slightly lower than this estimate.
- Units: 1 kg/m = 0.6719689 lb/ft; 1 inch = 25.4 mm; 1 ft = 0.3048 m.
The weight is theoretical, based on nominal dimensions. Delivered weight also depends on the actual wall within its tolerance, the corner radius and the length tolerance, so invoice weight can differ from the calculated value.
Densities used for each grade
Densities are the guidance values from EN 10088-1:2023, Annex E (Tables E.1–E.5), which lists stainless steel density to one decimal place in kg/dm³ (equal to g/cm³). Mill data sheets often quote more digits, for example AK Steel gives 8.03 g/cm³ for 304/304L and ASM Alloy Digest gives 7.99 for 316L; use the custom density option if your contract specifies a different value.
Japanese pipe standard JIS G3459:2016, Table 10 gives the densities used to calculate the unit mass of stainless steel pipe: 7.93 g/cm³ for 304, 304L and 321, and 7.98 g/cm³ for 316, 316L, 310S, 317L and 347. Many Asian mill weight tables follow these values; choose the JIS options above to match them. The JIS result is about 0.4% (304) or 0.25% (316) higher than with the EN value.
The full list of densities and other physical properties by grade is on the stainless steel density page.
Example weights: round tube
Calculated with the formula above from nominal OD × wall in mm.
| OD × wall (mm) | 304 / 304L, kg/m (ρ 7.9) | 316 / 316L, kg/m (ρ 8.0) |
|---|---|---|
| 6 × 1 | 0.124 | 0.126 |
| 10 × 1 | 0.223 | 0.226 |
| 12.7 × 1.24 | 0.353 | 0.357 |
| 19.05 × 1.65 | 0.713 | 0.722 |
| 25.4 × 1.65 | 0.973 | 0.985 |
| 38.1 × 1.65 | 1.493 | 1.512 |
| 50.8 × 1.65 | 2.013 | 2.038 |
| 63.5 × 1.65 | 2.533 | 2.565 |
| 76.2 × 2 | 3.683 | 3.730 |
| 101.6 × 2 | 4.944 | 5.006 |
Example weights: square and rectangular tube
Sharp-corner estimate for 304 (ρ 7.9), sides × wall in mm.
| A × B × wall (mm) | kg/m |
|---|---|
| 20 × 20 × 1.5 | 0.877 |
| 25 × 25 × 1.5 | 1.114 |
| 40 × 40 × 2 | 2.402 |
| 50 × 50 × 2 | 3.034 |
| 50 × 25 × 1.5 | 1.706 |
| 80 × 40 × 2 | 3.666 |
| 100 × 50 × 3 | 6.826 |
For pipe by NPS and schedule, see the stainless steel pipe schedule chart (ASME B36.19); for tube sizes, the stainless steel tube size chart, square tubing sizes and rectangular tube sizes.


